TSP Submersible Pumps
Product Overview
ZIRCO distributes EPG SurePump™ TSP Submersible Pumps designed for efficient leachate and wastewater management in landfill and remediation applications. These submersible systems offer flow ranges from 1 to 850 GPM with durable stainless steel construction for harsh environmental conditions.
Available in Pollution Recovery (1/3 to 2 HP) and Sandfighter (3 to 60 HP) models to match specific application requirements. Features include E-Glide™ bearings for extended service life, 304 stainless steel construction, and various cable jacket materials for chemical compatibility.
Technical Specifications
Flow Range by Series
| Series | Flow Range (GPM) | Nominal Flow (GPM) |
|---|---|---|
| Series - 2 | 1-14 | 10 |
| Series - 3 | 10-20 | 15 |
| Series - 5 | 15-30 | 25 |
| Series - 7 | 20-50 | 35 |
| Series - 9 | 20-50 | 45 |
| Series - 11 | 35-80 | 62 |
| Series - 14 | 45-95 | 77 |
| Series - 18 | 20-120 | 85 |
| Series - 31 | 50-200 | 150 |
| Series - 47 | 75-300 | 230 |
| Series - 61 | 50-400 | 300 |
| Series - 77 | 75-500 | 385 |
| Series - 95 | 95-680 | 475 |
| Series - 125 | 125-850 | 625 |
Component Materials
| Component | Standard | 316 Stainless Steel |
|---|---|---|
| Check Valve Housing | 304 Stainless Steel | Special Order |
| Check Valve | 304 Stainless Steel | Special Order |
| Check Valve Seat | E-Glide™ | Special Order |
| Diffuser Chamber | 304 Stainless Steel | Special Order |
| Impeller Seal Ring | E-Glide™ | Special Order |
| Impeller | 304 Stainless Steel | Special Order |
| Motor Adapter | 304 Stainless Steel | Special Order |
| Inlet Screen | 304 Stainless Steel | Special Order |
| Pump Shaft | 304/431 Stainless Steel | Special Order |
| Coupling | 304/420/431 Stainless Steel | Special Order |
| Fasteners | 304 Stainless Steel | Special Order |
| Bearings | E-Glide™ | Special Order |
Motor Specifications by Application
| Component | 1/3 to 2 HP Pollution Recovery | 3 to 60 HP Sandfighter |
|---|---|---|
| End Bell Castings | 304 Stainless Steel over Iron | 304 Stainless Steel over Iron |
| Stator Shell | 301 Stainless Steel | 301 Stainless Steel |
| Shaft Extension | 303 Stainless Steel | 303 Stainless Steel |
| Fasteners | 316 Stainless Steel | 300 Stainless Steel |
| Seal Cover | Tefzel | Sintered Bronze |
| Shaft Seal | Viton | Viton, Carbon, Ceramic Face Seal |
| Diaphragm | Viton | Nitrile Rubber |
| Diaphragm Plate | 304 Stainless Steel | 304 Stainless Steel |
| Diaphragm Spring | 302 Stainless Steel | 302 Stainless Steel |
| Diaphragm Cover | 316 Stainless Steel | 304 Stainless Steel |
| Slinger | Viton | Nitrile Rubber |
| Lead Sleeve | 316 Stainless Steel | 316 Stainless Steel |
| Lead Jam Nut | 316 Stainless Steel | N/A |
| Lead Jam Clamp | N/A | N/A |
| Lead Potting | Epoxy | Epoxy |
| Lead Sleeve | Viton | Viton |
Cable Jacket Material Properties
| Property | CP Cable | SBR Rubber | SO Neoprene | PVC |
|---|---|---|---|---|
| Unaged Physicals | ||||
| Tensil Strength (psi) | 2500 | 1420 | 1630 | 1410 |
| 100% Modulus (psi) | 340 | 690 | 770 | 780 |
| Elongation (%) | 650 | 300 | 300 | 330 |
| Low Temperature Properties | ||||
| Brittle Point (°F) | < -100 | -52 | -38 | -32 |
| Cold Bend @ -35°C | Pass | Pass | Pass | Pass |
| Cold Bend @ -50°C | Pass | Pass | Fail | Fail |
| Cold Bend @ -65°C | Pass | Fail | Fail | Fail |
| Chemical Resistance | ||||
| Water Resistance | Excellent | Good | Good | Excellent |
| Acid Resistance | Excellent | Good | Good | Good |
| Alkali Resistance | Excellent | Good | Good | Good |
| Aliphatic (gasoline, kerosene) | Excellent | Average | Average | Good |
| Aromatic Hydrocarbons | Excellent | Average | Average | Average |
| Oil Resistance | Excellent | Average | Average | Excellent |
Legend: E = Excellent, G = Good, A = Average. Ratings based on average performance of general purpose compounds.
Product Literature & Resources
Technical Documents
TSP Pump Technical Specifications
Complete TSP pump specifications and series information
Vertical Riser Design Guide
Complete EPG sump pump brochure
SurePump™ EPG Pumps – Suitable for Class I, Division 1 & 2 Locations
Why EPG Pumps are suitable for Class1, Division 1 & 2 Applications
Request for Quote
Request for Quote (RFQ) Form
Download and complete this form to submit your leachate pumping system requirements for quotation
Frequently Asked Questions
What is the flow range of TSP submersible pumps?
expand_more
Our TSP submersible pumps offer flow ranges from 1 to 850 GPM, with multiple series configurations available to match specific application requirements.
What is the difference between Pollution Recovery and
Sandfighter models?
expand_more
Pollution Recovery models (1/3 to 2 HP) are designed for lighter-duty applications, while Sandfighter models (3 to 60 HP) are built for heavy-duty applications with high solids content. Both feature stainless steel construction and E-Glide™ bearings.
What cable jacket options are available?
expand_more
We offer CP Cable, SBR Rubber, SO Neoprene, and PVC cable jacket options. CP Cable provides superior chemical resistance and low-temperature performance, while PVC offers good general-purpose properties.
Where are TSP submersible pumps typically used?
expand_more
TSP submersible pumps are commonly used in landfill leachate collection systems, groundwater remediation projects, and industrial wastewater applications. They're designed for direct submersion in sumps, wells, and collection pits.
Ready to Serve Your Industry?
Contact our team today to discuss how ZIRCO can provide specialized solutions for your industry needs with expertise spanning over 40 years of service across Western Canada.